Spiral tubs are a common fixture in garage shops and outdoor events.
These flexible plastic tubes are designed to hold up to 30 gallons of water, or up to 6 gallons of ice.
You can purchase them online, but the ones that I have seen that are readily available are pricey.
Here are a few suggestions for making your own Spiral Tub:Cut your tubing to the size of your garage.
The easiest way to do this is to use a 4-inch square cut-out and drill two holes through the center of the cutout.
Use a small-diameter drill bit and tap the cutouts as you drill the holes.
Then use a 3/8-inch hole saw to cut the tube out.
For the other end of the tube, drill a small hole in the tube’s center.
You will need a 2-inch piece of 1/4-inch pipe or a pipe clamp.
The best tube clamp is a 12-inch diameter PVC pipe with a diameter of 1.5 inches.
You may need to drill a 6-inch wide hole in each tube to hold the clamp.
When the tube is fully assembled, cut it in half lengthwise.
You will need to measure the width of the one-half and drill a 4/8 inch hole through the other half.
Now you have a tube that can hold up up to 5 gallons of liquid or 6 gallons ice.
Once you have assembled your Spiral Tub, it’s time to use it for a fun project.
To do this, fill the tube with ice, then dip the tube into the ice.
Make sure the ice is completely covered with ice and doesn’t get caught in the tubing.
Then place the ice onto the end of your Spiral Tube and fill it with water.
Repeat this process until the tube freezes solid.
If you can’t find a tube in your garage that can do this safely, you can build one of these for your home garage.
You could also build one for your outdoor event, like a birthday party or a birthday picnic.
This Spiral Tub is an excellent option for a DIY project because it is easy to assemble, it can hold a lot of ice and the ice can be placed in any position.
Spiral Tub is rated at 2 gallons of capacity and can hold 5 gallons ice, or about 30 gallons.