By now, you’ve probably heard of the spiral wax and steel tubes that come with many of the most popular digital cameras and smartphones out there.
The tubes are great for making photos look great, and they’re cheap, too.
Unfortunately, they don’t always have the same effect on the photo as you might think.
Now, it looks like the tubes will be making a comeback.
TechCrunch reports that a brand called Spiral Wax is back with a new line of tubes.
Spiral Wax has been around for a while now, with their popular waxed tubes being used in the likes of the Samsung Galaxy S4 and Samsung Galaxy Note4.
These waxed filters work by spraying a solution of silicone and silicone oil onto a plastic plate.
The silicone oil is then rubbed into the glass of the tube, and the result is a shiny film.
The lens cap, which the tube sits on, is then covered in the same solution, and that results in a film that’s easy to remove.
The Spiral Wax tube comes in a variety of shapes, but one thing that stands out is the way that the glass on the tube is coated with a gel.
If you look at the picture above, you can see the gel coating on the lens cap.
This is because the gel acts like a lens filter, and it’s used to remove dirt and fingerprints from the lens surface.
It’s a little tricky to see in the picture, but the gel itself is very thin.
It’s also fairly hard to see on the glass surface, as it’s very small and the glass is quite glossy.
The glass is also very hard to clean, so if you leave the tube in for a couple of hours, the gel will start to peel off.
This is something that’s a bit annoying, but in the end, it’s a good idea to clean your lens every few months, or at least once a year.
So how do you use the Spiral Wax?
Spiral waxes are easy to make, too, as they’re just a matter of oil and silicone.
You’ll need a glass, a glass plate, and a funnel.
The funnel is for spraying the gel onto the glass, and you’ll need to put the tube on a flat surface.
Once you’ve sprayed the gel on the plastic, you’ll want to place the lens in the tube to make sure it’s clear of any dirt and debris.
After the lens is in place, you’re going to use a sponge to rub the gel into the lens.
The gel will then rub against the lens, which should leave a clear film on the surface of the lens glass.
When the gel has completely rubbed into your lens glass, you will want to wipe the gel off with a paper towel.
Then you’ll just use your finger to lightly wipe the lens from the gel-covered glass.
If you’re a bit more skilled at cleaning your lens, you could even try to use the gel to gently scratch the lens to remove any residue from the glass.
This should be easy, as the gel doesn’t leave a residue at all.
With a little practice, you should be able to clean the lens lens in under an hour.
I found the gel works great to remove the gel and clean the glass after each use.
Overall, this is an easy product to use, and I’m definitely glad to have it again.